Text only | Text with Images

JREB.org

Modelers Layout => Discussion => Topic started by: NorfolkSouthern91 on August 09, 2008, 01:00:28 PM

Title: a little help with my GP60 7140 repaint
Post by: NorfolkSouthern91 on August 09, 2008, 01:00:28 PM
I  repainted  my NS GP60 7140 into the horsehead paint like it is today and i need to know if n scale horse head decals would work for the little NS logo

Photo is from www.nslocos.com.
Title: Re: a little help with my GP60 7140 repaint
Post by: ThoroughBreed on August 10, 2008, 06:20:17 PM
Actually, the following Microscale sheet has the smaller decals on it also: 87-1225, but you still have to have the OLS sheet for the GP60, sheet #MC-4057 . But if you have one of the Athearn units, all you have to do is add the sill stripes, paint the brow and then remove the existing small NS on the sides.
Title: Re: a little help with my GP60 7140 repaint
Post by: NorfolkSouthern91 on August 10, 2008, 09:41:46 PM
i was talking about the little horse head logo.
Title: Re: a little help with my GP60 7140 repaint
Post by: ThoroughBreed on August 11, 2008, 07:19:45 AM
look at the bottom set of side logos and you will see they are the ones you are looking for:
(https://www.jreb.org/ns/proxy.php?request=http%3A%2F%2Fwww.microscale.com%2FMerchant2%2Fgraphics%2F00000001%2F871225.jpg&hash=137c01c04e287f66a5ff716bdb48f1502cc1aaac)
Title: Re: a little help with my GP60 7140 repaint
Post by: ns_7011 on August 13, 2008, 01:12:34 AM
Yea you might be able to get away with that, it might be a smidge too big but i don't think anyone would notice.
Title: Re: a little help with my GP60 7140 repaint
Post by: RJ on August 17, 2008, 10:40:07 PM


I made ns 1000......and used the same ones      It looks ok!!!!!!!!!!!
Text only | Text with Images